Bán T-Motor F4 Stack - F4 FC, F55A Pro II 3-6S 4-in-1 ESC Combo giá tốt nhất

T-Motor F4 Stack - F4 FC, F55A Pro II 3-6S 4-in-1 ESC Combo T-Motor's well-designed F4 Fight Controller combined with the FF55A PRO II 55A 3-6s BLHeli32 4in1 ESC will give you optimized performance - using the included 10pin cable for solderless installation and ultra-low stack height. Flight Controller The T-Motor F4 Flight Controller comes with an LC filter, which is great for eliminating interference to your VTX or other equipment. Equipped with a 5V/2A BEC allows hooking up of receivers, cameras, and other 5v compatible gear. The F4 is loaded with 6 UARTs and is specially optimized to fit the FF55A PRO II ESC. The user also has the choice of two gyros - the ICM20602 for high refresh rates or the MPU6000. Specifications Input Voltage: 2-8S (8.4-33.6V) MCU: STM32F405RGT6 IMU: ICM20602 OSD: Yes Blackbox: 16MB Onboard Flash UARTs: 6 ESC Connections: 6 Firmware: BetaFlight Target: T-Motor F4 BEC: 5V 2A LC Filter: Yes Current Sensor: Esc Telemetry / Current ADC Buzzer: Pads Barometer: No Dimensions: 37x37x7mm Mounting Pattern: 30.5x30.5mm Weight: 7g ESC The F55 Pro II updates the original F55 with a new heatsink design, LED, and increased the BEC current to 10V@2A. Fully capable of pushing 6s with 75A burst and a sustained 55A current draw. Equipped with the latest in ESC technology such as 32-bit capability and BLHeli32 firmware. Specifications Continuous current: 4*55A BLHeli_32 32bit Burst current: 4*75A BEC Output: 10V @2.0A Size: 45x41x7.3mm Weight: 17.5g (Including Heatsink) Support DSHOT150/300/600/1200