Bán Startrc Bộ Khung Đáp Cho Dji Mavic Air 2 Drone giá tốt nhất

Multi-functional kit: Allow the drone to take off or land on water, or use it as extension landing gear to reduce the vibration when landing. Good protection for mavic air 2: Raise the drone up to 60mm above the dirt, sand, grass, provide good protection for drone camera and gimbal Design it for Mavic air 2 specially: Fits the the body perfectly No tools assembly: Easy to mount and disassemble, no tools assembly Installation Steps: 1.put the main mount top cover on the top of the drone. 2.as the picture shown, fix the 4 sponge stick mounts on the main mount connecting part. 3.Turn the drone over, and then align the main mount holder with the bottom of the drone. 4.Fix the main mount holder and main mount top cover with two M3 screws on the drone. 5.Insert the sponge sticks on the loops of the main mount holder, and the adjust each stick to a proper balance position. 6.After the adjusting, and then put the drone on clam water, and check the balance. If it is not balance, please adjust the position of the sponge sticks, and make the front and back balance. Colour: black Material: PLA+ABS Size: 247 x 240mm Package Contents: 1 x main bracket connector 1 x top cover 2 x sponge stick 4 x sponge stick holder 2 x screws 2 x M3 screws 1 x external hexagon screw 1 x camera tripod adapter 1 x M5 screw 1 x washer 1 x sponge tape 1 x manual Notes Please note that the floating kit will allow the drone to land or take off on calm water, but not choppy water, otherwise, the drone may lost. Allows to mount led or camera which has camera tripod adapter. Light weight design won't bring drone heavy loadingOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.