Bán Rơ Le Đèn Led 2 Pin Cho Xe Máy giá tốt nhất

Features: - This Flasher Relay will solve LED related turn signal indicator problems such as hyperflashing, not flashing, or bulb out warning message on dashboard indicator or just replace a failed relay. - It will NOT help if your indicators are hazarding when they should be indicating. To fix this, you will either need to add two diodes to the wiring loom (and use an LED indicator relay) or use LED load resistors. - It can eliminate the usage of load resistor, directly replace OEM 2-pin flasher relay and operate with LED's or conventional bulbs at normal flash rate. - It is speed adjustable. Use a flat head screw driver to adjust the knob at the bottom to set its flashing speed from 50 cycles per minute to 200 cycles per minute; clockwise to reduce the speed, anticlockwise to increase the speed. - Easy Plug & Play installation on most bikes and scooters for Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands - Waterproof resistant design, efficient unit with no excess heat issue Specifications: Voltage: 12V Current: 20A Operating Voltage: 11-15V Switch Current: Min. 0.05A Switch Load: Min. 0.6W Operating Temperature: -40°C to +80°C Power: 0.02-20W Flashing Frequency: 60 to 200 times per min Notice: This LED flasher relay works plug & play on most motorcycles with standard 2-Pin flasher relays. Notes: 1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 2. The picture may not show the actual color of the item because of different photographing light, angle and display monitor. Included: 1 X LED Indicator Flasher Relay