Bán Mô Đun Wifi Không Dây Esp8266 Esp-01 Esp-01S Esp-07 Esp-12E Esp-12F 2.4g giá tốt nhất

ESP01 1. High quality & low price 2. LWIP agreement 3. Support 3 modes: AP, STA, AP+STA 4. Perfect and simple AT commands Now for Arduino can get on WiFI without braking the bank. Use this module for your next Interet of Things project, home automation, Or remote sensor project. This module adats the ESP8226 IC for use over a serial connection using simple AT commands. No SPI interface or Know-How is required. Warnings: This module requires a 3.3 volt supply for VCC, and 3.3V logic. It is not 5V tolant. Connect RX or TX on 5V for Arduino will destroy this module. You must use a logic level converter, or a 3.3V for Arduino The 3.3V supply on the for Arduino Uno has inadequate current capabilit to power this module. You must provide a separate, higher 3.3V supply(about 300mA or better) ESP-07 Model:ESP8266 ISM 2.4GHz PA +25dBm 802.11b/g/n Warnings: 1.This module requires a 3.3 volt supply for VCC, and 3.3V logic. 2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module. 3.You must use a logic level converter, or a 3.3V FOR Arduino 4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module. 5.You must provide a separate,higher 3.3V supply(about 300mA or better) ESP-12F ESP8266-12F is an enhanced version of ESP8266-12, perfect peripheral circuit, four-layer board technology, enhanced impedance matching, better signal output, whether it is stability or anti-jamming capability, PCB antenna through professional laboratory testing, ROHS certification , Have been greatly improved! For those who choose ESP-12 before, even if the product has been made it does not matter, enhanced version is fully compatible with the firmware before the pin in the ESP-12 on the basis of the addition of six IO port, SPI port leads, the development more convenient, More extensive! Standards Certification: FCC / CE / TELEC Wireless standards: 802.11 b / g / n Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) Data interface: UART / HSPI / I2C / I2S / Ir Remote Contorl GPIO / PWM Operating voltage: 3.0 ~ 3.6V (recommendation 3.3V) Working Current: Average: 80mA Operating temperature: -40 ° ~ 125 ° Storage temperature: Nomal temperature ESP-12E Model:ESP8266-12 ISM 2.4GHz PA +25dBm 802.11b/g/n Warnings: 1.This module requires a 3.3 volt supply for VCC, and 3.3V logic. 2.It is not 5V tolant,Connect RX or TX on 5V FOR Arduino will destroy this module. 3.You must use a logic level converter, or a 3.3V FOR Arduino 4.The 3.3V supply on the FOR Arduino Uno has inadequate current capabilit to power this module. 5.You must provide a separate,higher 3.3V supply(about 300mA or better)