Bán Công tắc cảm biến bằng kim loại LJ12A3-4-Z / BX giá tốt nhất

Large energy applications for small size Proximity switch sensor is a displacement sensor with switch output with NPN, PNP, Metal (e.g. steel, iron, copper), plastics, glass, wood, etc., which can be detected by open, closed and relay, Transparent and opaque objects such as water, paper, magnets can be with PLC, servo controller, inverter, calculator The purpose of the controller connecting to achieve automatic input signal is widely used in mechanical, textile, light papermaking, printing and packaging industries. Product parameters information Help you understand our products better Lag distance: less than 10% of detection distance Detection object: magnetic metal (reduced detection distance for non-magnetic metals) Power supply voltage: dc 12-24V (6-36V) pulse (P - P) 10% Ac110-220v (36-250V) 50/60Hz Current consumption: type N.P: below 13mA, type D: below 0.8 ma, type A: below 1.7 ma Control output: type N.P: below 300mA, type D: below 200mA, type A: below 400mA Circuit protection: type N.P.D: reverse connection protection, surge absorption, load short circuit protection Type a: surge absorption Ambient temperature and humidity: action, preservation: each - 30~+ 65°C 35~95% RH each (no ice, no dew), action, time of preservation Insulation impedance: 50 mq+DC500 megameter charging part between shell Temperature effect: temperature range - 30~+ 65C,+23C, within 15 detection distance Temperature range - 25~+ 60C,+23x, within 10% detection distance Voltage effect: rated power voltage range+15%, rated power voltage value+10% inspection Within range Protective structure: IP67 (IEC specification) Material: (shell: brass nickel plated) (detection surface: ABS) Points to note - Cannot use this product when the power supply is connected (within 100MS) - Surge protection: when induction switches are used close to surge interference (e.g. welding operations for welding machines), add surge absorption devices - When a larger current load (e.g. bulb, motor) is connected, the initial resistance is reduced by the current shock. only when the current increases, the load resistance increases the current returns to normal. in this case, the current shock will damage the induction switch. please use a small relay to convert the protection induction switch - Inductive switches cannot be powered by a self-coupled transformer and isolation transformers should be used - The connection line of the induction switch should be as short as possible to reduce noise interference - The two-line induction switch power supply line cannot be directly connected to the power supply. it must be connected with a series load or damage the induction switch Dear customer friend, welcome to consult our customer service